LSP AUTOVENT 3000

LSP AutoVent 3000 Transport Ventilator Repairs

From Industrial and Volunteer EMS Use, to Air and Ground Transport: The LSP AutoVent 3000

Susquehanna Micro specializes in service and repairs for the LSP AutoVent 3000 Transport Ventilator. Offering controlled ventilation at rates of 8-28 breaths per minute as well as additional inspiratory time settings, the AutoVent 3000 meets most critical emergency care situations and in-hospital transports.

LSP AutoVent 3000 Transport Ventilator Repair Service - Susquehanna Micro Inc.

Schedule Service

The AutoVent 3000 comes with the LSP patient valve and supply tubing, the control module, six feet of oxygen hose, a non-rebreathing valve (to attach Peep), and connecting tubing. The attached patient valve allows a patient to draw supplemental gas flow (up to 48 LPM) with a spontaneous effort. The AutoVent is available as an anti-inhalation valve for use in toxic environments. The ventilator operates exclusively on source gas with no air entrainment, so specified concentrations of oxygen can be easily maintained. We specialize in sales and service for the LSP AutoVent 3000 Transport Ventilator.

We specialize in service and repairs for all aspects of the LSP AutoVent 3000 and it's counterparts, the AutoVent 2000 and AutoVent 4000. Contact us today to schedule service or to request a quote.

Order Parts & Accessories

We offer a complete line of products, parts and accessories for use with the LSP AutoVent 3000 Transport Ventilator. From tubing and cables to custom parts and equipment, we're happy to help you with all your needs.

Need service? We're here to help.

Our service team specializes in repairs for the LSP 2000, 3000, and 4000 AutoVent Transport Ventilators. With a combined 85 years of experience, we've worked with many major manufacturers and are the leading North American dealer of Acutronic Jet Ventilators. 

LSP AUTOVENT 3000 SPECIFICATIONS

Control Module:
  • Supply Pressure Range: 40 to 90 psig
  • Storage Temperature: -40°F to 160°F
  • Frequency: 8 to 28 BPM
  • Tidal Volume: 400 to 1200 ml.
  • Flow Rate: 16 to 48 LPM
  • Inspiratory Time: 1.5 to 2 seconds
  • Expiratory Time: 1.5 to 6.0 seconds
  • I:E Ratio: 1:1 to 1:4
  • Dead Space in Patient Valve Assembly: 8 ml
  • Weight: 24 oz./680g.
  • Expiratory Resistance: 5 cm. H20
  • Minute Volume: 0 to 24 LPM
  • Case Material: ABS
  • Input Connection: Plated brass
  • Output Connectors: Plated brass 
  • Gas Consumption Driving Gas: 0.5 LPM Maximum
Patient Valve Assembly:
  • Flow: As required in demand valve mode: 0-48 LPM at 50 psig. Depends on volume setting.
  • Peak Inspiratory Flow: 48 LPM at airway pressure drop of less than 2.5 cm H20
  • Delivery Pressure: 60 ±5 cm H20 (44 mm Hg)
  • Crack Pressure: 0- to -2 cm H20 (0 to -.8 in H20)
  • Exhalation Resistance: 0-10 LPM to 1.5 cm H20, 11-70 LPM to 3.8 H20
  • Gas Consumption Driving Gas: 0.5 LPM Max
  • Dead Space: 8 ml (excluding mask)
  • Supply Pressure: 40 to 90 psig
  • Operating Temperature: -30°F to 125°F
  • Storage Temperature: -40°F to 160°F
  • Inlet Fitting: Standard male oxygen DISS
  • Filter: 25 Micron Stainless Steel Mesh
  • Outlet: 22 mm outside diameter x 15 mm inside diameter (fits standard medical masks, endotracheal tubes and tracheostomy tubes)
  • Weight: 16 oz/450g
  • Body: Anodized aluminum
  • Cover: Polycarbonate
  • Outlet: Polysulfone
  • Inlet Fitting: Plated brass
Share by: