PALCO OXIMETERS

Oximeters from Palco / Mediaid

Palco 300 Handheld Pulse Oximeter

The Palco 300 Handheld Pulse Oximeter is so small that it can fit into a lab coat pocket. The oximeter is designed for spot checks, and is more economical than comparable handheld oximeters. We also sell Palco Probes and Sensors for use with Palco Oximeters.

The Palco 300 demonstrates a stunning operating room accuracy for such a small, portable instrument. When FDA compliance tests were carried out on healthy volunteers breathing low oxygen gas studies, blood gas studies demonstrated accuracies of ±2% over the entire range of 99 to 60% saturation. Treadmill or exercise desaturation tests are also possible with the Palco 300, especially if used with four or eight foot extension cables.
  • FEATURES
    • Over 1,000 readings on one set of 6 "AA" alkaline batteries!
    • NiCad rechargeable version also available
    • Bright, red LED displays for saturation and pulse rate
    • Rugged, water-resistant case withstands shock and vibration
    • Weighs only 1.01 lbs with batteries!
  • SPECIFICATIONS

    Dimensions

    • 8.89cm x 3.5cm x 19.05cm, 3.5in x 1.375in x 7.5in
    • Weight:  1.01 lbs. with batteries

    Power Ratings


    Battery Type:  

    6 "AA' Alkaline batteries (or) NiCad rechargeable

    Battery Life (in continuous operation):  8 hours - "AA" Alkaline version, 12 hours - NiCad version


    Adaptor (rechargeable version):  

    120V, 60Hz AC to 12V D (or) 230V, 50Hz AC to 12V DC


    Sensors

    • Sensor Compatibility:  Uses all Palco Opto-Plethysmographic sensors
    • Adult and Pediatric:  Opto-Plethysmographic
    • Sensor Cable Lengths:  1.2 or 2.4 meters (4 or 8 feet)

    Oxygen Saturation and Pulse Rate


    Display:

      Two 3-digit, 7-segment LED

      1.1cm (0.4 in) high characters


    Resolution:

      1% SpO2 or 1 beat/minute (BPM)


    Range:

      SpO2: 0 to 100%

      Pulse: 25 to 250 BPM


    Accuracy:

      SpO2:

        100 to 70%, ±2%

        69 to 60%, ±3%

        Less than 60% unspecified


    Pulse:

      25 to 250 BPM, ±2


    Environmental

    • Atmospheric Pressure:  775 to 500 Hg (-570 to 11,000 feet)
    • Relative Humidity:  5 to 95% (Noncondensing)
    • Operating Temperature:  0°C to 45°C (+32°F to +113°F
    • Storage Temperature:   -30°C to 65°C (-22°F to +149°F

Palco 340 Handheld Oximeter

The Palco 340 Handheld Pulse Oximeter is a portable oximeter with alarms and a bright red LED display. The mounting bracket pictured in the image at left is optional.

The Palco 340 oximeter features an adjustable pulse sound, where the pitch changes with rise or fall in oxygen saturation. It is compatible with all Opto-Plethsymographic Palco Probes and Sensors. The Palco Handhelds are the perfect small oximeters for emergency medicine, respiratory therapy, operating labs, cath labs or endoscopy.
  • FEATURES
    • Weighs only 1.02 lbs!
    • 12 hour NiCad or continuous AC powered operation
    • Adjustable pulse sound: Pitch changes with rise or fall in saturation
    • Output port for data communication to other instruments
    • Adjustable alarms for saturation and pulse rate
    • Previous alarm settings are recalled from memory
  • SPECIFICATIONS

    Dimensions


    Width x Height x Length:

        8.89cm x 3.5cm x 19.05cm

        3.5in x 1.375in x 7.5in


    Weight:  

    1.02 lbs.


    Power Ratings


    • Battery Type:  NiCad rechargeable
    • Battery Life:  12 hours continuous, with 8 hour charge
    • A/C Adaptor:  120V, 60Hz AC to 12V DC (or) 230V, 50Hz AC to 12V DC

    Sensors


    Sensor Compatibility:  

    Uses all Palco Opto-Plethysmographic sensors


    Oxygen Saturation and Pulse Rate


    Display:

      Two 3-digit, 7-segment LED

      1.1cm (0.4 in) high characters


    Resolution:

      1% SpO2 or 1 beat/minute (BPM)


    Range:

      SpO2: 0 to 100%

      Pulse: 25 to 250 BPM


    Accuracy:

      SpO2:

        100 to 70%, ±2%

        69 to 60%, ±3%

        Less than 60% unspecified


    Pulse:

      25 to 250 BPM, ±2

Palco 340 Handheld Oximeter - Susquehanna Micro

Palco 400 Handheld Oximeter

The Palco 400 is Palco's deluxe handheld oximeter. The Palco 400 is designed with an integral (built-in) printer, which has selectable automatic print-intervals. A printout can be obtained every 15, 30, or 60 seconds or at other intervals up to 10 minutes. Palco 400 is compatible with all Opto-Plethsymographic Palco Probes and Sensors.

The Palco 400 also features special screens for Nighttime Desaturation:
  • Mode 1:  All low saturation events below a pre-set point are recalled for later printout.
  • Mode 2:  The oximeter recalls the lowest point reached during consecutive two-minute periods for the entire monitoring session. Tape printouts include the percentage of time below 90, 80, 70 and 60% saturation.
  • FEATURES
    • Easily changed snap-in paper cartridge
    • Rechargeable battery pack with 4 hours continuous life, 8 hour charge
    • External battery pack can be changed in seconds for continuous monitoring
    • Weighs only 3 lbs
    • Alarms for saturation and rate
  • SPECIFICATIONS

    Dimensions


    Width x Height x Length:

        14.0cm x 6.5cm x 30.0cm

        5.5in x 2.5in x 12in


    Weight:  

    1.36 kilos (3 lbs.)


    Power Ratings


    • Battery Type:  NiCad rechargeable
    • Battery Life:  4 hours continuous, with 8 hour charge
    • A/C Adaptor: 120V, 60Hz AC to 18V D (or) 220V to 240V, 50Hz AC to 18V DC

    Sensors


    Sensor Compatibility:  

    Uses all Palco Opto-Plethysmographic sensors


    Oxygen Saturation and Pulse Rate


    Display:

      Two 3-digit, 7-segment LED

      1.5cm (0.6 in) high characters


    Resolution:

      1% SpO2 or 1 beat/minute (BPM)


    Range:

      SpO2: 0 to 100%

      Pulse: 25 to 250 BPM


    Accuracy:

      SpO2:

        100 to 70%, ±2%

        69 to 60%, ±3%

        Less than 60% unspecified


    Pulse:

      25 to 250 BPM, ±2

REQUEST A QUOTE

Share by: