Product Name: Spinnaker TL Total Lung Analyzer (310)

Flat Screen Model

Part Number: CYB-310

As of 11/01/07 this unit is no longer serviced !
Unit must be upgraded or replaced !
Call for Avaliable units.

Cybermedic 310  

Susquehanna Micro is a factory trained serviced center for Cybermedic Products. Our service technicians have over 50 years combined experience servicing PFT (pulmonary function test) systems. We specialize in the sales of refurbished Cybermedic Spinnaker TL and Classic TLi full gas systems.

The Spinnaker TL (or 310) fully automated system employs easy-to-learn, menu-driven software to guide you through the programs. The flexible patient valve arm allows you to find a stable, comfortable position for every patient.

The system provides you with a choice of Spirometry and MVV Testing or Lung Volume, FRC and DLCO Testing, selection of automated or manual end-of-test termination, and a choice of predicted values, as well as customizable reports and interpretations. We sell the Spinnaker TL with a two year warranty, which includes parts and labor.

Spinnaker Tl (310) Systems Come with the Following Hardware:

Automated Pulmonary Function Analyzer
3 Gas Regulators: Helium, Oxygen, Balance Gas
Main System Power Supply
ACE Card Interface
Canon BJC Color Ink Jet Printer
Installation / Interface to Cybermedic PFT Screener System
Dell / Pentium II processor / 3.5+ GB harddrive
15" Flat Screen Monitor
Cart with Casters for Easy Transport

Standard Spinnaker TL Features:

- Full Patient Data Storage, Including Raw Test Data and Graphics
- User-Definable Report Formats
- Test Interpretation and Choice of Equations for Predicted Values
- Sterilizable Breathing Circuit
- Automated Calibration
- Real-time, high-resolution flow/volume loop graphics
- Instant recall graphics and Pre- and Post- graphic comparisons
- Linear HE and CO analyzers
- TLC analysis from steady-state HE dilution
- Single breath DLCO testing
- Automated test sequencing, 02 addition, and baseline correction
- Variable breath holding time, washout and sample volume
- Real-time graphic display of bellows volume, HE and CO concentrations, baselines, 02 addition, solenoid positions, breath hold time and breathing excursions
- Automated system flushing and gas addition

The Patient Filters for most of our systems including the Cosmed Spirometers, Cosmed Pulmonary Function Equipment, Cybermedic Spirometers, Cybermedic Pulmonary Function equipment, Collins Pulmonary Function Equipment, Morgan Scientific/Medisoft Pulmonary Function Equipment, and the NSpire Koko Spirometer use the part number CYB-CB1503. PFT Patient Filters are recommended for use when bacteria and viruses are exhaled by a patient during testing, and without a PFT filter, they are carried into the PFT equipment tubing, flow sensor and possibly into the circuitry. Viral/bacterial filters enhance patient care by easing their fears of cross contamination and increase productivity by decreasing sterilization requirements. Visit our Filters page for more information.


Dimensions(Main Unit):
Width:  15.5 inches
Length:  19.5 inches
Height:  8.75 inches

Power Ratings:
Power Requirements:  105 to 130 VAC, 60 Hz, 3.0A (Peak)
/ 1.5 A (Steady State)


Full Gas Testing:
DLCO, VA, ERV, RV, TLC, FRC, RV and derived parameters

Spirometry Testing:
FVC, FEV1, FEV1/FVC, FIV1, SVC, ERV, IRV, IC, EC, MVV, Bronchial Challenge


For a list of Routine PFT supplies available from Susquehanna Micro, including Sodalyme, noseclips and gases, click here
Product Images
Sales & Educational Literature